Wholesale Oil Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

abide by the contract, conforms to the market requirement, joins during the market competition by its superior quality also as provides extra comprehensive and exceptional service for consumers to let them turn into significant winner. The pursue of the business, is definitely the clients' gratification for China Solvent Weld Pipe , Helical Welded Pipe , Pipe Fbe Coating , We warmly welcome you to establish cooperation and create a bright future together with us.

Wholesale Oil Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:

Chemical Composition of ASTM A234 WPB & WPC

Element	Content, %
Element	ASTM A234 WPB	ASTM A234 WPC
Carbon [C]	≤0.30	≤0.35
Manganese [Mn]	0.29-1.06	0.29-1.06
Phosphorus [P]	≤0.050	≤0.050
Sulfur [S]	≤0.058	≤0.058
Silicon [Si]	≥0.10	≥0.10
Chromium [Cr]	≤0.40	≤0.40
Molybdenum [Mo]	≤0.15	≤0.15
Nickel [Ni]	≤0.40	≤0.40
Copper [Cu]	≤0.40	≤0.40
Vanadium [V]	≤0.08	≤0.08

*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.

Mechanical Properties of ASTM A234 WPB & WPC

ASTM A234 Grades	Tensile Strength, min.		Yield Strength, min.		Elongation %, min
ASTM A234 Grades	ksi	MPa	ksi	MPa	Longitudinal	Transverse
WPB	60	415	35	240	22	14
WPC	70	485	40	275	22	14

*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.

Manufacture

The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.

Product detail pictures:

Related Product Guide:

From the past few years, our firm absorbed and digested sophisticated technologies equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted into the growth of Wholesale Oil Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: Johannesburg, Latvia, Latvia, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows Survive by good quality, Develop by keeping good credit. operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.

Double Welded Pipe