Wholesale Oil Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral
Wholesale Oil Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:
Chemical Composition of ASTM A234 WPB & WPC
|
Element |
Content, % |
|
|
ASTM A234 WPB |
ASTM A234 WPC |
|
|
Carbon [C] |
≤0.30 |
≤0.35 |
|
Manganese [Mn] |
0.29-1.06 |
0.29-1.06 |
|
Phosphorus [P] |
≤0.050 |
≤0.050 |
|
Sulfur [S] |
≤0.058 |
≤0.058 |
|
Silicon [Si] |
≥0.10 |
≥0.10 |
|
Chromium [Cr] |
≤0.40 |
≤0.40 |
|
Molybdenum [Mo] |
≤0.15 |
≤0.15 |
|
Nickel [Ni] |
≤0.40 |
≤0.40 |
|
Copper [Cu] |
≤0.40 |
≤0.40 |
|
Vanadium [V] |
≤0.08 |
≤0.08 |
*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.
Mechanical Properties of ASTM A234 WPB & WPC
|
ASTM A234 Grades |
Tensile Strength, min. |
Yield Strength, min. |
Elongation %, min |
|||
|
ksi |
MPa |
ksi |
MPa |
Longitudinal |
Transverse |
|
|
WPB |
60 |
415 |
35 |
240 |
22 |
14 |
|
WPC |
70 |
485 |
40 |
275 |
22 |
14 |
*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.
Manufacture
The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.
Product detail pictures:
Related Product Guide:
The organization keeps for the procedure concept scientific administration, superior quality and effectiveness primacy, shopper supreme for Wholesale Oil Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: Congo, Iceland, Canada, Our company regards reasonable prices, efficient production time and good after-sales service as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
By Lillian from Spain - 2017.09.29 11:19
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Adelaide from Madras - 2017.09.26 12:12
