Reasonable Price Carbon Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral
Reasonable Price Carbon Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:
Chemical Composition of ASTM A234 WPB & WPC
|
Element |
Content, % |
|
|
ASTM A234 WPB |
ASTM A234 WPC |
|
|
Carbon [C] |
≤0.30 |
≤0.35 |
|
Manganese [Mn] |
0.29-1.06 |
0.29-1.06 |
|
Phosphorus [P] |
≤0.050 |
≤0.050 |
|
Sulfur [S] |
≤0.058 |
≤0.058 |
|
Silicon [Si] |
≥0.10 |
≥0.10 |
|
Chromium [Cr] |
≤0.40 |
≤0.40 |
|
Molybdenum [Mo] |
≤0.15 |
≤0.15 |
|
Nickel [Ni] |
≤0.40 |
≤0.40 |
|
Copper [Cu] |
≤0.40 |
≤0.40 |
|
Vanadium [V] |
≤0.08 |
≤0.08 |
*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.
Mechanical Properties of ASTM A234 WPB & WPC
|
ASTM A234 Grades |
Tensile Strength, min. |
Yield Strength, min. |
Elongation %, min |
|||
|
ksi |
MPa |
ksi |
MPa |
Longitudinal |
Transverse |
|
|
WPB |
60 |
415 |
35 |
240 |
22 |
14 |
|
WPC |
70 |
485 |
40 |
275 |
22 |
14 |
*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.
Manufacture
The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.
Product detail pictures:
Related Product Guide:
we can easily offer you high-quality products and solutions, competitive rate and very best shopper support. Our destination is You come here with difficulty and we give you a smile to take away for Reasonable Price Carbon Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: Guatemala, Lithuania, Azerbaijan, In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!



