OEM/ODM Supplier Pipe Line Welding - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

Sticking for the principle of Super Quality, Satisfactory service ,We have been striving for being a superb small business partner of you for Solvent Weld Pipe , Water Pipe Welding , Water Line Tubing , If needed, welcome to help make speak to with us by our web page or cellular phone consultation, we are going to be delighted to serve you.

OEM/ODM Supplier Pipe Line Welding - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral Detail:

Mechanical Property

steel grade	minimum yield strength Mpa		Tensile strength		Minimum elongation %	Minimum impact energy J
steel grade	Specified thickness mm		Specified thickness mm		Specified thickness mm	at test temperature of
	＜16	＞16≤40	＜3	≥3≤40	≤40	-20℃	0℃	20℃
S235JRH	235	225	360-510	360-510	24	-	-	27
S275J0H	275	265	430-580	410-560	20	-	27	-
S275J2H	275	265	430-580	410-560	20	27	-	-
S355J0H	365	345	510-680	470-630	20	-	27	-
S355J2H						27	-	-
S355K2H						40	-	-

Chemical Composition

Steel grade		Type of de-oxidation a	% by mass, maximum
Steel name	Steel number	C	C	Si	Mn	P	S	Nb
S235JRH	1.0039	FF	0,17	—	1,40	0,040	0,040	0.009
S275J0H	1.0149	FF	0,20	—	1,50	0,035	0,035	0,009
S275J2H	1.0138	FF	0,20	—	1,50	0,030	0,030	—
S355J0H	1.0547	FF	0,22	0,55	1,60	0,035	0,035	0,009
S355J2H	1.0576	FF	0,22	0,55	1,60	0,030	0,030	—
S355K2H	1.0512	FF	0,22	0,55	1,60	0,030	0,030	—
a. The deoxidation method is designated as follows: FF: Fully killed steel containing nitrogen binding elements in amounts sufficient to bind available nitrogen (e.g. min. 0,020 % total Al or 0,015 % soluble Al). b. The maximum value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0,020 % with a minimum Al/N ratio of 2:1, or if sufficient other N-binding elements are present. The N-binding elements shall be recorded in the Inspection Document.

Hydrostatic Test

Each length of pipe shall be tested by the manufacturer to a hydrostatic pressure that will produce in the pipe wall a stress of not less than 60% of the specified minimum yield strength at room temperature. The pressure shall be determined by the following equation:
P=2St/D

Permissible Variations In Weights and Dimensions

Each length of pipe shall be weighed separately and its weight shall not vary more than 10% over or 5.5% under its theoretical weight, calculated using its length and its weight per unit length
The outside diameter shall not vary more than ±1% from the specified nominal outside diameter
Wall thickness at any point shall not more than 12.5% under the specified wall thickness

Product detail pictures:

Related Product Guide:

Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of OEM/ODM Supplier Pipe Line Welding - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral , The product will supply to all over the world, such as: Kenya, Moscow, Mauritania, Based on our automatic production line, steady material purchase channel and quick subcontract systems have been built in mainland China to meet customer's wider and higher requirement in recent years. We have been looking forward to cooperating with more clients worldwide for common development and mutual benefit!Your trust and approval are the best reward for our efforts. Keeping honest, innovative and efficient, we sincerely expect that we can be business partners to create our brilliant future!

Double Submerged Arc Welded