OEM Supply Repairing Sewer Line - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral
OEM Supply Repairing Sewer Line - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral Detail:
The Mechanical Properties of the SSAW pipe
|
steel grade |
minimum yield strength |
minimum Tensile strength |
Minimum Elongation |
|
B |
245 |
415 |
23 |
|
X42 |
290 |
415 |
23 |
|
X46 |
320 |
435 |
22 |
|
X52 |
360 |
460 |
21 |
|
X56 |
390 |
490 |
19 |
|
X60 |
415 |
520 |
18 |
|
X65 |
450 |
535 |
18 |
|
X70 |
485 |
570 |
17 |
The Chemical composition of the SSAW pipes
|
steel grade |
C |
Mn |
P |
S |
V+Nb+Ti |
|
Max % |
Max % |
Max % |
Max % |
Max % |
|
|
B |
0.26 |
1.2 |
0.03 |
0.03 |
0.15 |
|
X42 |
0.26 |
1.3 |
0.03 |
0.03 |
0.15 |
|
X46 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X52 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X56 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X60 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X65 |
0.26 |
1.45 |
0.03 |
0.03 |
0.15 |
|
X70 |
0.26 |
1.65 |
0.03 |
0.03 |
0.15 |
The Geometric tolerance of the SSAW pipes
|
Geometric tolerances |
||||||||||
|
outside diameter |
Wall thickness |
straightness |
out-of-roundness |
mass |
Maximum weld bead height |
|||||
|
D |
T |
|||||||||
|
≤1422mm |
>1422mm |
<15mm |
≥15mm |
pipe end 1.5m |
full length |
pipe body |
pipe end |
T≤13mm |
T>13mm |
|
|
±0.5% |
as agreed |
±10% |
±1.5mm |
3.2mm |
0.2% L |
0.020D |
0.015D |
‘+10% |
3.5mm |
4.8mm |
Hydrostatic Test

The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
Jointers need not be hydrostatically tested, providedthat the portions of pipe used in marking the jointers were successfully hydrostatically tested prior to the joining operation.
Traceablity:
For PSL 1 pipe, the manufacturer shall establish and follow documented procedures for maintaining:
The heat identity until each related chmical tests is performed and conformance with the specified requirements is shown
The test-unit identity until each related mechanical tests is performed and conformance with the specified requirements is shown
For PSL 2 pipe, the manufacturer shall establish and follow documented procedures for maintaining the heat identity and the test-unit identity for such pipe. Such procedures shall provide means for tracing any length of pipe to the proper test unit and the related chemical test results.
Product detail pictures:
Related Product Guide:
we could supply good quality goods, aggressive cost and very best purchaser assistance. Our destination is You come here with difficulty and we supply you with a smile to take away for OEM Supply Repairing Sewer Line - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral , The product will supply to all over the world, such as: Cologne, Brasilia, Serbia, Till now, the goods list has been updated regularly and attracted clients from around the globe. Detailed facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.




