New Fashion Design For Underground Gas Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for High-Quality DSAW Pipes , Astm Steel Pipe , Fbe Coating Thickness , We adhere to the tenet of Services of Standardization, to Meet Customers' Demands.

New Fashion Design For Underground Gas Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral Detail:

The Mechanical Properties of the SSAW pipe

steel grade	minimum yield strength Mpa	minimum Tensile strength Mpa	Minimum Elongation %
B	245	415	23
X42	290	415	23
X46	320	435	22
X52	360	460	21
X56	390	490	19
X60	415	520	18
X65	450	535	18
X70	485	570	17

The Chemical composition of the SSAW pipes

steel grade	C	Mn	P	S	V+Nb+Ti
	Max %	Max %	Max %	Max %	Max %
B	0.26	1.2	0.03	0.03	0.15
X42	0.26	1.3	0.03	0.03	0.15
X46	0.26	1.4	0.03	0.03	0.15
X52	0.26	1.4	0.03	0.03	0.15
X56	0.26	1.4	0.03	0.03	0.15
X60	0.26	1.4	0.03	0.03	0.15
X65	0.26	1.45	0.03	0.03	0.15
X70	0.26	1.65	0.03	0.03	0.15

The Geometric tolerance of the SSAW pipes

Geometric tolerances
outside diameter		Wall thickness		straightness		out-of-roundness		mass	Maximum weld bead height
D		T
≤1422mm	＞1422mm	＜15mm	≥15mm	pipe end 1.5m	full length	pipe body	pipe end		T≤13mm	T＞13mm
±0.5% ≤4mm	as agreed	±10%	±1.5mm	3.2mm	0.2% L	0.020D	0.015D	‘+10% -3.5%	3.5mm	4.8mm

Hydrostatic Test

product-description1

The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
Jointers need not be hydrostatically tested, providedthat the portions of pipe used in marking the jointers were successfully hydrostatically tested prior to the joining operation.

Traceablity:
For PSL 1 pipe, the manufacturer shall establish and follow documented procedures for maintaining:
The heat identity until each related chmical tests is performed and conformance with the specified requirements is shown
The test-unit identity until each related mechanical tests is performed and conformance with the specified requirements is shown
For PSL 2 pipe, the manufacturer shall establish and follow documented procedures for maintaining the heat identity and the test-unit identity for such pipe. Such procedures shall provide means for tracing any length of pipe to the proper test unit and the related chemical test results.

Product detail pictures:

Related Product Guide:

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for New Fashion Design For Underground Gas Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral , The product will supply to all over the world, such as: Seattle, London, India, Wide selection and fast delivery for you! Our philosophy: Good quality, great service, keep improving. We are looking forward that more and more oversea friends join in our family for further development near the future!

A252 GRADE 2 Steel Pipe