Manufacturer For Welded Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral
Manufacturer For Welded Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral Detail:
Mechanical Property
| Grade A | Grade B | Grade C | Grade D | Grade E | |
| Yield strength, min, Mpa(KSI) | 330(48) | 415(60) | 415(60) | 415(60) | 445(66) |
| Tensile strength, min, Mpa(KSI) | 205(30) | 240(35) | 290(42) | 315(46) | 360(52) |
Chemical Composition
|
Element |
Composition, Max, % |
||||
|
Grade A |
Grade B |
Grade C |
Grade D |
Grade E |
|
|
Carbon |
0.25 |
0.26 |
0.28 |
0.30 |
0.30 |
|
Manganese |
1.00 |
1.00 |
1.20 |
1.30 |
1.40 |
|
Phosphorus |
0.035 |
0.035 |
0.035 |
0.035 |
0.035 |
|
Sulfur |
0.035 |
0.035 |
0.035 |
0.035 |
0.035 |
Hydrostatic Test
Each length of pipe shall be tested by the manufacturer to a hydrostatic pressure that will produce in the pipe wall a stress of not less than 60% of the specified minimum yield strength at room temperature. The pressure shall be determined by the following equation:
P=2St/D
Permissible Variations In Weights and Dimensions
Each length of pipe shall be weighed separately and its weight shall not vary more than 10% over or 5.5% under its theoretical weight, calculated using its length and its weight per unit length.
The outside diameter shall not vary more than ±1% from the specified nominal outside diameter.
Wall thickness at any point shall not more than 12.5% under the specified wall thickness.
Length
Single random lengths: 16 to 25ft(4.88 to 7.62m)
Double random lengths: over 25ft to 35ft(7.62 to 10.67m)
Uniform lengths: permissible variation ±1in
Ends
Pipe piles shall be furnished with plain ends, and the burrs at the ends shall be removed
When the pipe end specified to be bevel ends, the angle shall be 30 to 35 degree
Product detail pictures:
Related Product Guide:
Our staff through skilled training. Skilled skilled knowledge, potent sense of company, to satisfy the provider requirements of consumers for Manufacturer For Welded Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral , The product will supply to all over the world, such as: Mumbai, Curacao, Dubai, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Belle from Japan - 2017.02.14 13:19
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Jean from Cologne - 2018.08.12 12:27
