Manufacturer For Welded Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for X52 SSAW Line Pipe , S235 J0 Spiral Steel Pipe Exporter , Insulated Water Line , Quality is factory's life , Focus on customers' demand is the source of company survival and development, We adhere to honesty and good faith working attitude, looking forward to your coming !

Manufacturer For Welded Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral Detail:

Mechanical Property

	Grade A	Grade B	Grade C	Grade D	Grade E
Yield strength, min, Mpa(KSI)	330(48)	415(60)	415(60)	415(60)	445(66)
Tensile strength, min, Mpa(KSI)	205(30)	240(35)	290(42)	315(46)	360(52)

Chemical Composition

Element	Composition, Max, %
Element	Grade A	Grade B	Grade C	Grade D	Grade E
Carbon	0.25	0.26	0.28	0.30	0.30
Manganese	1.00	1.00	1.20	1.30	1.40
Phosphorus	0.035	0.035	0.035	0.035	0.035
Sulfur	0.035	0.035	0.035	0.035	0.035

Hydrostatic Test

Each length of pipe shall be tested by the manufacturer to a hydrostatic pressure that will produce in the pipe wall a stress of not less than 60% of the specified minimum yield strength at room temperature. The pressure shall be determined by the following equation:
P=2St/D

Permissible Variations In Weights and Dimensions

Each length of pipe shall be weighed separately and its weight shall not vary more than 10% over or 5.5% under its theoretical weight, calculated using its length and its weight per unit length.
The outside diameter shall not vary more than ±1% from the specified nominal outside diameter.
Wall thickness at any point shall not more than 12.5% under the specified wall thickness.

Length

Single random lengths: 16 to 25ft(4.88 to 7.62m)
Double random lengths: over 25ft to 35ft(7.62 to 10.67m)
Uniform lengths: permissible variation ±1in

Ends

Pipe piles shall be furnished with plain ends, and the burrs at the ends shall be removed
When the pipe end specified to be bevel ends, the angle shall be 30 to 35 degree

Product detail pictures:

Related Product Guide:

We'll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of intercontinental top-grade and high-tech enterprises for Manufacturer For Welded Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral , The product will supply to all over the world, such as: Hamburg, Georgia, Malaysia, Our product quality is one of the major concerns and has been produced to meet the customer's standards. Customer services and relationship is another important area which we understand good communication and relationships with our customers is the most significant power to run it as a long term business.

EN10219