Manufactur Standard Flexible Gas Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

Our eternal pursuits are the attitude of regard the market, regard the custom, regard the science as well as theory of quality the basic, have faith in the initial and administration the advanced for SSAW Pipe , Welded Pipe Fittings , High-Quality SPIRALLY WELDED STEEL PIPES ASTM A252 , Quality, honesty and service is our principle. Our loyalty and commitments remain respectfully at your service. Contact Us Today For further information, contact us now.

Manufactur Standard Flexible Gas Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral Detail:

Mechanical Property

	Grade A	Grade B	Grade C	Grade D	Grade E
Yield strength, min, Mpa(KSI)	330(48)	415(60)	415(60)	415(60)	445(66)
Tensile strength, min, Mpa(KSI)	205(30)	240(35)	290(42)	315(46)	360(52)

Chemical Composition

Element	Composition, Max, %
Element	Grade A	Grade B	Grade C	Grade D	Grade E
Carbon	0.25	0.26	0.28	0.30	0.30
Manganese	1.00	1.00	1.20	1.30	1.40
Phosphorus	0.035	0.035	0.035	0.035	0.035
Sulfur	0.035	0.035	0.035	0.035	0.035

Hydrostatic Test

Each length of pipe shall be tested by the manufacturer to a hydrostatic pressure that will produce in the pipe wall a stress of not less than 60% of the specified minimum yield strength at room temperature. The pressure shall be determined by the following equation:
P=2St/D

Permissible Variations In Weights and Dimensions

Each length of pipe shall be weighed separately and its weight shall not vary more than 10% over or 5.5% under its theoretical weight, calculated using its length and its weight per unit length.
The outside diameter shall not vary more than ±1% from the specified nominal outside diameter.
Wall thickness at any point shall not more than 12.5% under the specified wall thickness.

Length

Single random lengths: 16 to 25ft(4.88 to 7.62m)
Double random lengths: over 25ft to 35ft(7.62 to 10.67m)
Uniform lengths: permissible variation ±1in

Ends

Pipe piles shall be furnished with plain ends, and the burrs at the ends shall be removed
When the pipe end specified to be bevel ends, the angle shall be 30 to 35 degree

Product detail pictures:

Related Product Guide:

We have our own sales team, design team, technical team, QC team and package team. We have strict quality control procedures for each process. Also, all of our workers are experienced in printing field for Manufactur Standard Flexible Gas Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral , The product will supply to all over the world, such as: Azerbaijan, Salt Lake City, Madrid, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we'll continue to develop, to supply the high-quality goods and services, and promote lasting cooperation with our customers, common development and create a better future.

Cylindrical Shapes Steel Pipe

Drain Line

Fire Pipe Line

Gas Line Fitting

We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!

By Colin Hazel from Rotterdam - 2017.10.25 15:53

This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!

By Erin from Mali - 2018.06.05 13:10

Write your message here and send it to us