Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

Fast and great quotations, informed advisers to help you choose the correct solution that suits all your requirements, a short creation time, responsible top quality manage and distinct providers for paying and shipping affairs for Fbe Coating Pipeline , Mild Steel Pipe Sizes , China Frozen Condensate Pipe , In case you are intrigued in almost any of our merchandise, remember to will not hesitate to make contact with us and take the initial step to create up a prosperous enterprise romance.

Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:

Chemical Composition of ASTM A234 WPB & WPC

Element	Content, %
Element	ASTM A234 WPB	ASTM A234 WPC
Carbon [C]	≤0.30	≤0.35
Manganese [Mn]	0.29-1.06	0.29-1.06
Phosphorus [P]	≤0.050	≤0.050
Sulfur [S]	≤0.058	≤0.058
Silicon [Si]	≥0.10	≥0.10
Chromium [Cr]	≤0.40	≤0.40
Molybdenum [Mo]	≤0.15	≤0.15
Nickel [Ni]	≤0.40	≤0.40
Copper [Cu]	≤0.40	≤0.40
Vanadium [V]	≤0.08	≤0.08

*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.

Mechanical Properties of ASTM A234 WPB & WPC

ASTM A234 Grades	Tensile Strength, min.		Yield Strength, min.		Elongation %, min
ASTM A234 Grades	ksi	MPa	ksi	MPa	Longitudinal	Transverse
WPB	60	415	35	240	22	14
WPC	70	485	40	275	22	14

*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.

Manufacture

The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.

Product detail pictures:

Related Product Guide:

We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: Latvia, Thailand, Malta, We have customers from more than 20 countries and our reputation has been recognized by our esteemed customers. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.

Carbon Pipe Welding

Oil Pipe Welding

Spiral Seam Welded Pipe

Steel Pipe Pile Specifications

Tube & Pipe Welding

Weldable Steel Pipe

Welding Schedule 80 Pipe

Welding Stainless Pipe Without Purge

Welding Thin Wall Tubing

Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.

By Grace from California - 2018.07.12 12:19

The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.

By Christian from New Zealand - 2017.03.28 16:34

Write your message here and send it to us