Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for Oil Pipe Line , Steel Pipe Pile Sizes , Steel Pipe Industry , Quality, honesty and service is our principle. Our loyalty and commitments remain respectfully at your support. Call Us Today For even further info, get hold of us now.

Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:

Chemical Composition of ASTM A234 WPB & WPC

Element	Content, %
Element	ASTM A234 WPB	ASTM A234 WPC
Carbon [C]	≤0.30	≤0.35
Manganese [Mn]	0.29-1.06	0.29-1.06
Phosphorus [P]	≤0.050	≤0.050
Sulfur [S]	≤0.058	≤0.058
Silicon [Si]	≥0.10	≥0.10
Chromium [Cr]	≤0.40	≤0.40
Molybdenum [Mo]	≤0.15	≤0.15
Nickel [Ni]	≤0.40	≤0.40
Copper [Cu]	≤0.40	≤0.40
Vanadium [V]	≤0.08	≤0.08

*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.

Mechanical Properties of ASTM A234 WPB & WPC

ASTM A234 Grades	Tensile Strength, min.		Yield Strength, min.		Elongation %, min
ASTM A234 Grades	ksi	MPa	ksi	MPa	Longitudinal	Transverse
WPB	60	415	35	240	22	14
WPC	70	485	40	275	22	14

*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.

Manufacture

The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.

Product detail pictures:

Related Product Guide:

We usually believe that one's character decides products' high quality, the details decides products' excellent ,with the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: Tunisia, Indonesia, Senegal, We are seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.

Heavy Wall Pipe Welding