Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral
Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:
Chemical Composition of ASTM A234 WPB & WPC
|
Element |
Content, % |
|
|
ASTM A234 WPB |
ASTM A234 WPC |
|
|
Carbon [C] |
≤0.30 |
≤0.35 |
|
Manganese [Mn] |
0.29-1.06 |
0.29-1.06 |
|
Phosphorus [P] |
≤0.050 |
≤0.050 |
|
Sulfur [S] |
≤0.058 |
≤0.058 |
|
Silicon [Si] |
≥0.10 |
≥0.10 |
|
Chromium [Cr] |
≤0.40 |
≤0.40 |
|
Molybdenum [Mo] |
≤0.15 |
≤0.15 |
|
Nickel [Ni] |
≤0.40 |
≤0.40 |
|
Copper [Cu] |
≤0.40 |
≤0.40 |
|
Vanadium [V] |
≤0.08 |
≤0.08 |
*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.
Mechanical Properties of ASTM A234 WPB & WPC
|
ASTM A234 Grades |
Tensile Strength, min. |
Yield Strength, min. |
Elongation %, min |
|||
|
ksi |
MPa |
ksi |
MPa |
Longitudinal |
Transverse |
|
|
WPB |
60 |
415 |
35 |
240 |
22 |
14 |
|
WPC |
70 |
485 |
40 |
275 |
22 |
14 |
*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.
Manufacture
The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.
Product detail pictures:
Related Product Guide:
Normally customer-oriented, and it's our ultimate concentrate on for being not only one of the most dependable, trustable and honest supplier, but also the partner for our shoppers for Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: St. Petersburg, Iraq, Orlando, We welcome you to visit our company, factory and our showroom displayed various products that will meet your expectation, meanwhile, it is convenient to visit our website, our sales staff will try their efforts to offer you the best service. If you need to have more information, remember to do not hesitate to contact us by E-mail or telephone.
By Alice from Ukraine - 2017.04.18 16:45
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Eartha from Madras - 2017.07.28 15:46
