Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral
Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:
Chemical Composition of ASTM A234 WPB & WPC
|
Element |
Content, % |
|
|
ASTM A234 WPB |
ASTM A234 WPC |
|
|
Carbon [C] |
≤0.30 |
≤0.35 |
|
Manganese [Mn] |
0.29-1.06 |
0.29-1.06 |
|
Phosphorus [P] |
≤0.050 |
≤0.050 |
|
Sulfur [S] |
≤0.058 |
≤0.058 |
|
Silicon [Si] |
≥0.10 |
≥0.10 |
|
Chromium [Cr] |
≤0.40 |
≤0.40 |
|
Molybdenum [Mo] |
≤0.15 |
≤0.15 |
|
Nickel [Ni] |
≤0.40 |
≤0.40 |
|
Copper [Cu] |
≤0.40 |
≤0.40 |
|
Vanadium [V] |
≤0.08 |
≤0.08 |
*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.
Mechanical Properties of ASTM A234 WPB & WPC
|
ASTM A234 Grades |
Tensile Strength, min. |
Yield Strength, min. |
Elongation %, min |
|||
|
ksi |
MPa |
ksi |
MPa |
Longitudinal |
Transverse |
|
|
WPB |
60 |
415 |
35 |
240 |
22 |
14 |
|
WPC |
70 |
485 |
40 |
275 |
22 |
14 |
*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.
Manufacture
The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.
Product detail pictures:
Related Product Guide:
We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: Ukraine, Rio de Janeiro, Uruguay, As an experienced manufacturer we also accept customized order and we could make it the same as your picture or sample specification. The main goal of our company is to live a satisfactory memory to all the customers, and establish a long term business relationship with buyers and users all over the world.
By Anastasia from Belize - 2018.02.21 12:14
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Bruno Cabrera from Honduras - 2018.11.06 10:04
