Factory Outlets Residential Gas Piping - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

The organization upholds the philosophy of Be No.1 in good quality, be rooted on credit history and trustworthiness for growth, will keep on to provide previous and new customers from home and overseas whole-heatedly for Helical Seam Manufacturer , CE Certification X52 SSAW Line Pipe , China DSAW Pipes , Our tenet is Reasonable prices, economical production time and very best service We hope to cooperate with much more shoppers for mutual enhancement and benefits.

Factory Outlets Residential Gas Piping - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral Detail:

Mechanical Property

	Grade A	Grade B	Grade C	Grade D	Grade E
Yield strength, min, Mpa(KSI)	330(48)	415(60)	415(60)	415(60)	445(66)
Tensile strength, min, Mpa(KSI)	205(30)	240(35)	290(42)	315(46)	360(52)

Chemical Composition

Element	Composition, Max, %
Element	Grade A	Grade B	Grade C	Grade D	Grade E
Carbon	0.25	0.26	0.28	0.30	0.30
Manganese	1.00	1.00	1.20	1.30	1.40
Phosphorus	0.035	0.035	0.035	0.035	0.035
Sulfur	0.035	0.035	0.035	0.035	0.035

Hydrostatic Test

Each length of pipe shall be tested by the manufacturer to a hydrostatic pressure that will produce in the pipe wall a stress of not less than 60% of the specified minimum yield strength at room temperature. The pressure shall be determined by the following equation:
P=2St/D

Permissible Variations In Weights and Dimensions

Each length of pipe shall be weighed separately and its weight shall not vary more than 10% over or 5.5% under its theoretical weight, calculated using its length and its weight per unit length.
The outside diameter shall not vary more than ±1% from the specified nominal outside diameter.
Wall thickness at any point shall not more than 12.5% under the specified wall thickness.

Length

Single random lengths: 16 to 25ft(4.88 to 7.62m)
Double random lengths: over 25ft to 35ft(7.62 to 10.67m)
Uniform lengths: permissible variation ±1in

Ends

Pipe piles shall be furnished with plain ends, and the burrs at the ends shall be removed
When the pipe end specified to be bevel ends, the angle shall be 30 to 35 degree

Product detail pictures:

Related Product Guide:

We're going to dedicate ourselves to offering our esteemed shoppers with the most enthusiastically considerate solutions for Factory Outlets Residential Gas Piping - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral , The product will supply to all over the world, such as: Albania, belarus, Danish, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

A252 GRADE 1 Steel Pipe