Factory Cheap Hot DSAW Pipes - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral
Factory Cheap Hot DSAW Pipes - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral Detail:
The Mechanical Properties of the SSAW pipe
|
steel grade |
minimum yield strength |
minimum Tensile strength |
Minimum Elongation |
|
B |
245 |
415 |
23 |
|
X42 |
290 |
415 |
23 |
|
X46 |
320 |
435 |
22 |
|
X52 |
360 |
460 |
21 |
|
X56 |
390 |
490 |
19 |
|
X60 |
415 |
520 |
18 |
|
X65 |
450 |
535 |
18 |
|
X70 |
485 |
570 |
17 |
The Chemical composition of the SSAW pipes
|
steel grade |
C |
Mn |
P |
S |
V+Nb+Ti |
|
Max % |
Max % |
Max % |
Max % |
Max % |
|
|
B |
0.26 |
1.2 |
0.03 |
0.03 |
0.15 |
|
X42 |
0.26 |
1.3 |
0.03 |
0.03 |
0.15 |
|
X46 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X52 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X56 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X60 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X65 |
0.26 |
1.45 |
0.03 |
0.03 |
0.15 |
|
X70 |
0.26 |
1.65 |
0.03 |
0.03 |
0.15 |
The Geometric tolerance of the SSAW pipes
|
Geometric tolerances |
||||||||||
|
outside diameter |
Wall thickness |
straightness |
out-of-roundness |
mass |
Maximum weld bead height |
|||||
|
D |
T |
|||||||||
|
≤1422mm |
＞1422mm |
＜15mm |
≥15mm |
pipe end 1.5m |
full length |
pipe body |
pipe end |
T≤13mm |
T＞13mm |
|
|
±0.5% |
as agreed |
±10% |
±1.5mm |
3.2mm |
0.2% L |
0.020D |
0.015D |
‘+10% |
3.5mm |
4.8mm |
Hydrostatic Test
The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
Jointers need not be hydrostatically tested, providedthat the portions of pipe used in marking the jointers were successfully hydrostatically tested prior to the joining operation.
Traceablity:
For PSL 1 pipe, the manufacturer shall establish and follow documented procedures for maintaining:
The heat identity until each related chmical tests is performed and conformance with the specified requirements is shown
The test-unit identity until each related mechanical tests is performed and conformance with the specified requirements is shown
For PSL 2 pipe, the manufacturer shall establish and follow documented procedures for maintaining the heat identity and the test-unit identity for such pipe. Such procedures shall provide means for tracing any length of pipe to the proper test unit and the related chemical test results.
Product detail pictures:
Related Product Guide:
We now have a highly efficient crew to deal with inquiries from clients. Our intention is 100% shopper pleasure by our merchandise quality, price tag & our staff service and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Factory Cheap Hot DSAW Pipes - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral , The product will supply to all over the world, such as: Romania, Sydney, Azerbaijan, Many goods fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't have to waste time shopping around.
By Octavia from Canberra - 2018.09.23 17:37
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Afra from Honduras - 2018.09.08 17:09
