Chinese Professional Piling Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral
Chinese Professional Piling Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral Detail:
The Mechanical Properties of the SSAW pipe
|
steel grade |
minimum yield strength |
minimum Tensile strength |
Minimum Elongation |
|
B |
245 |
415 |
23 |
|
X42 |
290 |
415 |
23 |
|
X46 |
320 |
435 |
22 |
|
X52 |
360 |
460 |
21 |
|
X56 |
390 |
490 |
19 |
|
X60 |
415 |
520 |
18 |
|
X65 |
450 |
535 |
18 |
|
X70 |
485 |
570 |
17 |
The Chemical composition of the SSAW pipes
|
steel grade |
C |
Mn |
P |
S |
V+Nb+Ti |
|
Max % |
Max % |
Max % |
Max % |
Max % |
|
|
B |
0.26 |
1.2 |
0.03 |
0.03 |
0.15 |
|
X42 |
0.26 |
1.3 |
0.03 |
0.03 |
0.15 |
|
X46 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X52 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X56 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X60 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X65 |
0.26 |
1.45 |
0.03 |
0.03 |
0.15 |
|
X70 |
0.26 |
1.65 |
0.03 |
0.03 |
0.15 |
The Geometric tolerance of the SSAW pipes
|
Geometric tolerances |
||||||||||
|
outside diameter |
Wall thickness |
straightness |
out-of-roundness |
mass |
Maximum weld bead height |
|||||
|
D |
T |
|||||||||
|
≤1422mm |
＞1422mm |
＜15mm |
≥15mm |
pipe end 1.5m |
full length |
pipe body |
pipe end |
T≤13mm |
T＞13mm |
|
|
±0.5% |
as agreed |
±10% |
±1.5mm |
3.2mm |
0.2% L |
0.020D |
0.015D |
‘+10% |
3.5mm |
4.8mm |
Hydrostatic Test
The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
Jointers need not be hydrostatically tested, providedthat the portions of pipe used in marking the jointers were successfully hydrostatically tested prior to the joining operation.
Traceablity:
For PSL 1 pipe, the manufacturer shall establish and follow documented procedures for maintaining:
The heat identity until each related chmical tests is performed and conformance with the specified requirements is shown
The test-unit identity until each related mechanical tests is performed and conformance with the specified requirements is shown
For PSL 2 pipe, the manufacturer shall establish and follow documented procedures for maintaining the heat identity and the test-unit identity for such pipe. Such procedures shall provide means for tracing any length of pipe to the proper test unit and the related chemical test results.
Product detail pictures:
Related Product Guide:
It can be our duty to satisfy your preferences and successfully serve you. Your pleasure is our best reward. We have been looking forward to the go to for joint expansion for Chinese Professional Piling Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral , The product will supply to all over the world, such as: Ottawa, California, Florida, Due to our good goods and services, we've received good reputation and credibility from local and international customers. If you will need more information and are interested in any of our solutions, be sure to feel free to contact us. We look forward to becoming your supplier in the near future.
By Ivy from Italy - 2018.03.03 13:09
The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
By Kama from Czech - 2018.10.09 19:07
