China Wholesale X52 SSAW Line Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

We have been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Seam Pipe , Ssaw Pipe Stockist , Sewer Pipe Line , Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.

China Wholesale X52 SSAW Line Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral Detail:

The Mechanical Properties of the SSAW pipe

steel grade	minimum yield strength Mpa	minimum Tensile strength Mpa	Minimum Elongation %
B	245	415	23
X42	290	415	23
X46	320	435	22
X52	360	460	21
X56	390	490	19
X60	415	520	18
X65	450	535	18
X70	485	570	17

The Chemical composition of the SSAW pipes

steel grade	C	Mn	P	S	V+Nb+Ti
	Max %	Max %	Max %	Max %	Max %
B	0.26	1.2	0.03	0.03	0.15
X42	0.26	1.3	0.03	0.03	0.15
X46	0.26	1.4	0.03	0.03	0.15
X52	0.26	1.4	0.03	0.03	0.15
X56	0.26	1.4	0.03	0.03	0.15
X60	0.26	1.4	0.03	0.03	0.15
X65	0.26	1.45	0.03	0.03	0.15
X70	0.26	1.65	0.03	0.03	0.15

The Geometric tolerance of the SSAW pipes

Geometric tolerances
outside diameter		Wall thickness		straightness		out-of-roundness		mass	Maximum weld bead height
D		T
≤1422mm	＞1422mm	＜15mm	≥15mm	pipe end 1.5m	full length	pipe body	pipe end		T≤13mm	T＞13mm
±0.5% ≤4mm	as agreed	±10%	±1.5mm	3.2mm	0.2% L	0.020D	0.015D	‘+10% -3.5%	3.5mm	4.8mm

Hydrostatic Test

product-description1

The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
Jointers need not be hydrostatically tested, providedthat the portions of pipe used in marking the jointers were successfully hydrostatically tested prior to the joining operation.

Traceablity:
For PSL 1 pipe, the manufacturer shall establish and follow documented procedures for maintaining:
The heat identity until each related chmical tests is performed and conformance with the specified requirements is shown
The test-unit identity until each related mechanical tests is performed and conformance with the specified requirements is shown
For PSL 2 pipe, the manufacturer shall establish and follow documented procedures for maintaining the heat identity and the test-unit identity for such pipe. Such procedures shall provide means for tracing any length of pipe to the proper test unit and the related chemical test results.

Product detail pictures:

Related Product Guide:

To be a result of ours specialty and service consciousness, our company has won a superb reputation between customers all around the environment for China Wholesale X52 SSAW Line Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral , The product will supply to all over the world, such as: UK, Panama, Florida, Our Company policy is quality first, to be better and stronger, sustainable development . Our pursuit goals is for society, customers, employees, partners and enterprises to seek reasonable benefit. We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.

Gas Line Pipe

Gas Pipe Fitting

Gas Pipes

Natural Gas Pipe

Pile Tube

Spiral Submerged Arc Pipe

This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.