Best Price For Main Water Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral
Best Price For Main Water Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral Detail:
The Mechanical Properties of the SSAW pipe
|
steel grade |
minimum yield strength |
minimum Tensile strength |
Minimum Elongation |
|
B |
245 |
415 |
23 |
|
X42 |
290 |
415 |
23 |
|
X46 |
320 |
435 |
22 |
|
X52 |
360 |
460 |
21 |
|
X56 |
390 |
490 |
19 |
|
X60 |
415 |
520 |
18 |
|
X65 |
450 |
535 |
18 |
|
X70 |
485 |
570 |
17 |
The Chemical composition of the SSAW pipes
|
steel grade |
C |
Mn |
P |
S |
V+Nb+Ti |
|
Max % |
Max % |
Max % |
Max % |
Max % |
|
|
B |
0.26 |
1.2 |
0.03 |
0.03 |
0.15 |
|
X42 |
0.26 |
1.3 |
0.03 |
0.03 |
0.15 |
|
X46 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X52 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X56 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X60 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
|
X65 |
0.26 |
1.45 |
0.03 |
0.03 |
0.15 |
|
X70 |
0.26 |
1.65 |
0.03 |
0.03 |
0.15 |
The Geometric tolerance of the SSAW pipes
|
Geometric tolerances |
||||||||||
|
outside diameter |
Wall thickness |
straightness |
out-of-roundness |
mass |
Maximum weld bead height |
|||||
|
D |
T |
|||||||||
|
≤1422mm |
＞1422mm |
＜15mm |
≥15mm |
pipe end 1.5m |
full length |
pipe body |
pipe end |
T≤13mm |
T＞13mm |
|
|
±0.5% |
as agreed |
±10% |
±1.5mm |
3.2mm |
0.2% L |
0.020D |
0.015D |
‘+10% |
3.5mm |
4.8mm |
Hydrostatic Test
The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
Jointers need not be hydrostatically tested, providedthat the portions of pipe used in marking the jointers were successfully hydrostatically tested prior to the joining operation.
Traceablity:
For PSL 1 pipe, the manufacturer shall establish and follow documented procedures for maintaining:
The heat identity until each related chmical tests is performed and conformance with the specified requirements is shown
The test-unit identity until each related mechanical tests is performed and conformance with the specified requirements is shown
For PSL 2 pipe, the manufacturer shall establish and follow documented procedures for maintaining the heat identity and the test-unit identity for such pipe. Such procedures shall provide means for tracing any length of pipe to the proper test unit and the related chemical test results.
Product detail pictures:
Related Product Guide:
We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Best Price For Main Water Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral , The product will supply to all over the world, such as: Netherlands, Czech, Latvia, Since always, we adhering to the open and fair, share to get, the pursuit of excellence, and creation of valuevalues, adhere to theintegrity and efficient, trade-oriented, best way , best valve business philosophy. Together with our all over the world have branches and partners to develop new business areas, maximum common values. We sincerely welcome and together we share in global resources, opening up new career together with the chapter.
By Antonio from Argentina - 2018.12.22 12:52
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Aaron from Pakistan - 2017.07.07 13:00
