100% Original Tube & Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Automated Pipe Welding , Gas Pipe Extension , Fbe Internal Pipe Coating , In case you are intrigued in any of our products or want to focus on a personalized get, please sense totally free to contact us. We're wanting ahead to forming successful enterprise relationships with new shoppers across the world during the in close proximity to long term.

100% Original Tube & Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:

Chemical Composition of ASTM A234 WPB & WPC

Element	Content, %
Element	ASTM A234 WPB	ASTM A234 WPC
Carbon [C]	≤0.30	≤0.35
Manganese [Mn]	0.29-1.06	0.29-1.06
Phosphorus [P]	≤0.050	≤0.050
Sulfur [S]	≤0.058	≤0.058
Silicon [Si]	≥0.10	≥0.10
Chromium [Cr]	≤0.40	≤0.40
Molybdenum [Mo]	≤0.15	≤0.15
Nickel [Ni]	≤0.40	≤0.40
Copper [Cu]	≤0.40	≤0.40
Vanadium [V]	≤0.08	≤0.08

*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.

Mechanical Properties of ASTM A234 WPB & WPC

ASTM A234 Grades	Tensile Strength, min.		Yield Strength, min.		Elongation %, min
ASTM A234 Grades	ksi	MPa	ksi	MPa	Longitudinal	Transverse
WPB	60	415	35	240	22	14
WPC	70	485	40	275	22	14

*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.

Manufacture

The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.

Product detail pictures:

Related Product Guide:

Our firm since its inception, normally regards item top quality as company life, constantly make improvements to generation technology, improve product excellent and repeatedly strengthen organization total good quality management, in strict accordance with the national standard ISO 9001:2000 for 100% Original Tube & Pipe Welding - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: USA, Oman, Norwegian, Now we've been sincerely consider to grant brand agent in different areas and our agents' maximum margin of profit is the most important thing we care about. Welcome all of the friends and customers to join us. We have been ready to share win-win corporation.

Double Welded Pipe